Schluter DITRA-HEAT Uncoupling Membrane Sheet 3'3" Wide x 2'7" Length x 1/4 Thick (8,6 Sq. Ft. / Sheet)

The DH5MA is an uncoupling and waterproofing membrane designed to secure the Ditra-Heat heating cable in place. Ditra-Heat provides uncoupling to neutralize shear stresses between the substrate and the tile covering to prevent cracked tile and grout. The cut-back stud structure of the Ditra-Heat membrane holds the heating cable in place without clips or fasteners. It also eliminates the need for a self-levelling compound which minimizes the assembly thickness and allows for quicker installation.

• Made of polypropylene
• Sheet dimensions are 3 ft. 3 in. x 2 ft. 7 in.
• Covers 8.6 sq. ft.

Schluter^®-DITRA-HEAT integrates customizable, comfortable electric floor warming with the functions associated with DITRA: uncoupling, waterproofing, vapour management, and support to ensure a long-lasting installation.

• The stud structure of DITRA-HEAT is specifically designed to allow for the easy installation of DITRA-HEAT-E-HK heating cables.
• Nominal 1/4" (5.5 mm) thickness minimizes tile assembly thickness and reduces transitions to lower surface coverings.
• Self-levelling compounds are not required to encapsulate the cables into the membrane.
• Available by the roll or by the sheet to accommodate various room sizes
• Quick and easy to install, and few tools are required
• Provides electric floor warming for use beneath tile, stone, or other resilient floor coverings (e.g. LVT)